Print directly from Cura via the USB port
Weedo has published a patch with which you can print directly from Cura 4.X on the Weedo X40. The patch should work on all operating systems.
The patch has not yet been tried with Cura 5.X, but it should work.
Install the CH341 driver on your operating system. Unzip the Cura patch and replace the AutoDetectBaudJob.py and USBPrinterOutputDevice.py in the Cura directory plugins / USBPrinting.
Connect the printer to your computer with a USB cable. After slicing, you can select the Print via USB button.
Please note that with the printer via Cura, the PC must remain switched on until printing is or has been ended.