Wear parts, spare parts and tuning parts for Weedo X40
In the X40 community cloud you will find eDrawings with which you can view the printer and the individual parts on the Computer. You can use the Windows exe files with the integrateted viewer or download the eDrawing viewer.
The following eDrawings are available:
- Weedo X40V1
- Weedo X40V1 PRO
- Weedo X40V1 PRO BMG
Wear parts
| Description | Dimension / standard | Items | Source of supply |
|
Filament |
For Ultimaker Cura with the X40 Community configuration it is recommended to use the supported materials. | ||
|
Nozzle 0,4mm |
Long life MK8 nozzle | ||
| Nozzle 0,6mm | Long life MK8 nozzle | ||
| Nozzle 0,8mm | Long life MK8 nozzle | ||
| Silicon socket | MK8 |
|
|
| Build surface | 310mm x 310mm | ||
| Brush (copper wire) | 12,5mm x 40mm
|
||
| Flexible Build System | 310mm x 310mm |
Spare parts
| Description | Dimension / standard | Items | Source of supply |
| Buildplate | Weedo X40 | 310mm x 310mm Buildplate Pei | |
| Heatbed | Weedo X40 | 310mm x 310mm | |
| Hotend | Weedo X40 |
Weedo X40 Nozzle kit |
|
| Heatsink | |||
| LCD Display | Weedo X40 |
Weedo 4.3'' Touch Screen for WEEDO 3D Printer X40, F152S, ME40 Pro, F192. |
|
| Mainboard | Weedo X40 |
Weedo Motherboard R73 for WEEDO X40 |
|
| Relais Board | Weedo X40 | Weedo Relais Bours for X40 | |
| Extruder / Runout Sensor | Weedo X40 | Extruder / Runout Sensor | |
| Cooler | Weedo X40 | Hotend heatsink | |
| Power supply | Power Supply 24V 480W |
JoyNano 480w 24v 20a ac-dc |
|
|
Heating cartridge |
24V 50W | ||
|
Thermistor |
100k Thermistor | ||
| Heatblock | MK8 | ||
| Heatbrake |
All-Metal MK8 Heatbreak for Weedo X40
|
The heat brakes for Makerbot 1 Dual, CTC Bizer and Flashforge Creator are identical, but have no key area. | |
|
Bowden cable |
Outer diameter 4mm, inner diameter 2mm, length approx. 500mm | Capricorn PFTE XS Bowden Tubing | |
|
Extruder-Fittings |
Depending on the extruder |
||
|
Inductive proximity switch |
M12x1 , Lenght 62mm NPN, 6-36VDC, |
||
|
Linear guide carriage |
For Weedo X40 X-axis |
Type MGN12C |
|
|
Camera / Wifi Modul |
|||
|
Cable and adapter board |
Weedo X40 |
Tuning parts
| Description | Dimension / standard | Items | Source of supply |
| X40-Community Part Coolingsystem |
Improved cooling system for the Weedo X40 | ||
| Fysetc BMG Extruder LH / RH |
Full Metall Dual Gear Extruder with 3:1 gear ratio |
An adapted firmware such as the X40 PRO BMG is required for use | |
| BiMetall Heatbrake | BiMetall Heatbrake for Creality CR6 SE | We need for temperatures above 260°C, so that the PFTE hose does not melt. (X40 PRO HT Firmware required) |
|
| MK8 Heatblock | 20x20x10 Micro Swiss Part: M2587 |
Micro Swiss Heater Block Upgrade with Silicone Sock for CR10 / Ender 2 / Ender 3 / ANET A8 Printers MK7, MK8, MK9 Hotends |
|